Axis Power 7 Central Wiki
Register
Advertisement
German with a Masher

Germans with a Kar 98k and one with A Potato Masher, during the Second World War...

The Model 24 Stielhandgranate was the standard hand grenade of the German Army from the end of World War I until the end of World War II. The very distinctive appearance led to its being called a "stick grenade", or a "potato masher" in British Army slang, and is today one of the most easily recognized infantry weapons of the 20th century.[1]

History[]

The stick grenade was introduced in 1915 and the design developed throughout World War I. A friction igniter was used; this method was uncommon in other countries but widely used for German grenades. Section of the Stielhandgranate Model 24.

A pull cord ran down the hollow handle from the detonator within the explosive head, terminating in a porcelain ball held in place by a detachable base closing cap. To use the grenade, the base cap was unscrewed, permitting the ball and cord to fall out. Pulling the cord dragged a roughened steel rod through the igniter causing it to flare-up and start the five-second fuse burning. This allowed the grenade to be hung from fences to prevent them from being climbed; any disturbance to the dangling grenade would cause it to fall and ignite the fuse.

The first stick grenades featured a permanently revealed pull cord which came out from the handle near the bottom (rather than tucked inside the removable screw-capped base). These exposed pull cords had a tendency to accidentally snag and detonate the grenades while being carried, causing severe (usually fatal) injuries.

Stick grenades were stored in cases for transport, and their fuse assemblies inserted prior to going into combat — a reminder for the user was stenciled on each explosive charge ("VOR GEBRAUCH SPRENGKAPSEL EINSETZEN", in English: "Before use insert detonator").


This type of grenade, featuring a high explosive charge encased in a thin sheet steel can, is an example of an "offensive" (relying on blast effect), rather than "defensive" (fragmentation) grenade. A serrated fragmentation sleeve ("Splitterring") was adopted in 1942 which could be slid over the head of the grenade. Fragments of the sleeve would be scattered on detonation, making the grenade more effective against personnel.

The stick provided a lever, significantly improving the throwing distance. The Model 24 could be thrown approximately 30 yards (27 m) to 40 yards (37 m), whereas the British Mills bomb could only be thrown about 15 yards (14 m).[2] With due respect to the Discovery Channel the British War Office report "WO 291/472 Performance and handling of HE grenades" gives an average figure for a standing throw of a Mills bomb as 30 yards (27 m), when crouched 25 yards (23 m) and lying 24 yards (22 m). The stick design also minimized the risk of the grenade rolling downhill back towards the thrower when used in hilly terrain or in urban areas. However, the additional length of the handle meant that fewer could be carried.

The grenades were extremely useful for clearing out entrenched infantry positions. Although they were not individually very effective against armoured vehicles and fortifications, the grenade could be used in an improvised "bundle" style with another six explosive heads (without their sticks) wired around the central stick grenade. These were known as Geballte Ladung (literally "baled load").

German stick grenades were desirable souvenirs for Allied soldiers in World War II, and originals are still much sought after by collectors. There is also a market in replicas, with examples of these being of varied quality and accuracy; many have a fundamentally incorrect profile and are notably lacking in details. In the U.S., the explosive charge and detonator must be removed.

Trivia[]

Advertisement